<- All flow instrumentation

BTMF THERMAL MASS FLOW METER

Thermal mass flow measures accurately the actual amount of gas flowing through the system, expressed in mass rather than volume. This means that, unlike traditional measurements, the data provided are more reliable and precise, regardless of temperature or pressure variations. In practice, they ensure maximum control and optimization of industrial processes, improving efficiency and safety. Thanks to their digital design and extensive communication options, they integrate perfectly into industrial automation systems, ensuring real-time control and monitoring in critical processes in the chemical, pharmaceutical, food and energy industries.

OPERATING PRINCIPLE The thermal mass sensor measures gas flow using two heated elements: one exposed directly to the flow, the other shielded. The gas in transit cools the active element, changing its electrical resistance. A digital circuit continuously rebalances the temperature of the two elements, providing a signal proportional to the mass of gas passing through the sensor. This technique eliminates errors due to pressure and temperature variations, directly returning flow in mass (kg/h) or standard volume (Nm³/h).

DOWNLOAD THE DATA SHEET

COMPETITIVE ADVANTAGES

▪ Direct mass measurement: eliminates compensation errors for reliable data in any condition.
▪ 100% digital design: advanced circuits and algorithms ensure stability and minimal drift over time.
▪ Wide measuring range: ratio up to 1:100, covers both extremely low and high flow rates.
▪ Hot-swap installation: extractable insert-type version for quick maintenance without stopping the plant.
▪ Plug & play integration: RS485 Modbus and HART for factory automation and real-time remote diagnostics.
▪ Industrial robustness: stainless steel construction, IP65 rating and ATEX certification for harsh environments.




TYPICAL APPLICATIONS

▪ Monitoring and control of technical gas flows (oxygen, nitrogen, compressed air, hydrogen)
▪ Dosing and mixing processes in chemical and pharmaceutical industries
▪ Combustion control systems and energy analysis
▪ Industrial air and gas treatment plants
▪ R&D and laboratory set-ups for precision flow measurements



Technical data
Parameter Value
Diameter nominale DN 25 – 3000 mm
Flow range from 0,1 … 100 Nm³/s up to 16800 … 168000 Nm³/h (depending on diameter)
Accuratezza typically ± 1% of full scale
Gas temperature –20 … 250 °C
Nominal pressure 1,0 … 4,0 MPa
Materials Body in SS304/SS316; SS304 ball valve
Signal outputs Impulsi; 4–20 mA; RS485 Modbus; HART
Unit of measure Nm³/h, Nm³/min, NL/h, NL/min, t/h, t/min, kg/h, kg/min
Power in 24 V DC + 220 V AC
Connections Flanged (DN 15–400 mm); insert type (DN 65–3000 mm)
Protection IP65
Certification ATEX Ex d IIC T6 Gb


TECHNICAL DATA

DN (mm) Gas thermal flow rate (Nm³/h)
DN101,7 - 17
DN154 - 40
DN206 - 60
DN2510 - 100
DN3217 - 170
DN4027 - 270
DN5036 - 360
DN6572 - 720
DN80108 - 1080
DN100168 - 1680
DN125264 - 2640
DN150378 - 3780
DN (mm) Gas thermal flow rate (Nm³/h)
DN200600 - 6000
DN2501000 - 10000
DN3001500 - 15000
DN3502100 - 21000
DN4002700 - 27000
DN4503420 - 34200
DN5004200 - 42000
DN6006000 - 60000
DN7008100 - 81000
DN80010800 - 108000
DN90013800 - 138000
DN100016800 - 168000




CONTACT US NOW

Customer service is an attitude



Our location

20092 Cinisello Balsamo (MI), Via dei lavoratori, 15-19

How can we help you?

sales@erredisrl.it

Send us a message now